With the buffer silo and frequency conversion feeding equipment. The multi-cylinder hydraulic cone crusher is broken by using the principle of laminated, it requires full uniform feeding, and feeding amount is large, so the equipment and the use of time must be at the front of the apparatus equipped with buffer bin installed, to ensure the continuity of cone crusher feed. Feeding equipment to accurately adjustable and controllable, suggest install inverter feeding equipment, ensure the equipment with stable feeding. Install centre feed device. Feeding hydraulic cone breaker multi cylinder are important factors which influence the crushing effect and service life. Feeding device of equipment to be installed, to ensure the center feed. The equipment must be kept smooth, prevent the accumulation of material too wet, too much or too powder material in the equipment below, the damaged equipment. As the belt machine with iron removal equipment and check device. Belt conveyor is a device for conveying feeding damage to multi-cylinder hydraulic cone, so the correct configuration of belt conveyor Chrome is also related to the good operation of equipment. The feed belt confidential and iron removal equipment, prevent breaking cone due to equipment damage caused by iron. While the non-return device can prevent the material feeding belt machine stops when the heavy fall, thereby reducing the belt conveyor belt material to stop production trouble.

Over the years, the state machine has been committed to the development of better multi-cylinder hydraulic cone crusher in at the same time, innovation has accumulated rich research and development, production and field experience. The machine through summarizing many Jaw crusher in Nicaragua multi-cylinder hydraulic cone crusher field experience, in the use of multi-cylinder hydraulic cone crusher, crushing effect through some simple techniques to achieve better and prolong its service life.

With the feeding of debugging the discharging port. Since the minimum discharge multi-cylinder hydraulic cone breaker mouth does not determine the minimum product size, so the equipment debugging, make sure equipment with feeding, then according to the equipment load adjustment of the discharge opening, which eventually reach the appropriate production load and finished product size.